CALL BIG DAVE WITH QUESTIONS ANYTIME! LANGEFELS EQUIPMENT CO. 513.276.5500

Sale

ALLIED

577992-EXC-1

Allied Rammer Hydraulic Hammers, Excellence Line, Small Range (SSL)(CTL)(ML)(EXC)(BKH)

MODEL
MOUNTING

RAMMER SERIES HAMMERS - SMALL RANGE

MODELS: 155E, 255E, 355E, 455E, 555E, 777E, 999E

Rammer’s Small Range hydraulic hammers are your reliable long life solution for any breaking application for carriers between 0.6 and 15 tons. Rammer Small Range hammers are built to last. Membrane-type accumulators assist with power stokes, whilst providing protection against hydraulic spikes. The field replaceable lower tool bushing and low-maintenance design ensure optimum hammer uptime, higher availability levels and reduced costs of ownership and operation.

FEATURES

  • RD3 The first ever monitoring system for hydraulic hammers – RD3. This system gives you detailed information about the operating hours, service intervals and GPS location of your product.
  • CBE (CONSTANT BLOW ENERGY) A built-in Pressure Adjusting Valve (PAV) maintains hydraulic pressure levels to ensure that every blow delivers the maximum power possible for optimum productivity. CBE operating principle enables wide accepted oil flow range and tolerates hammer against high back pressure allowing a wide range of carrier utilization. (Except 155)
  • MEMBRANE TYPE ACCUMULATOR Membrane type accumulator eliminates nitrogen leakages and removes the need for time consuming recharging. Tubular membrane type accumulator* ensures maximum piston acceleration and high impact frequency. (Except 1322E)
  • SINGLE BODY DESIGN WITHOUT TIE RODS Rammer single body design is simple and robust construction which enables ideal support and alignment for piston and tool as well as fast and easy service. (Except 1322E)
  • UPGRADED GREASING BUSHINGS AND THRUST RING Single part tool bushing with long bearing surface and thrust ring to maximize tool life. Shared retaining pin with simple locking ring allows easy replacement of tool bushing and tool. (Except 1322E)

APPLICATIONS FOR USE: GENERAL CONSTRUCTION, DEMOLITION, QUARRY, MINING, METALLURGICAL 

    MOUNTINGS

    • SKID STEER UNIVERSAL (BOBCAT)
    • MINI LOADER UNIVERSAL (TORO), BOBCAT MT, TORO TX2000
    • EXCAVATOR: PIN ON OEM, WAIN ROY XLS, TAG, GANNON ELIMINATOR, CP QUICK HITCH, DEERE WEDGE LOC, HITACHI WEDGE LOC, KUBOTA, AND BOBCAT EXCHANGE.

    * I WILL CALL YOU TO CONFIRM WHICH MOUNTING YOU NEED. PLEASE LEAVE YOUR PHONE NUMBER IN CHECK OUT PROCESS. (HH) high heat and (SC) Scaler versions of these hammers are available, please call for pricing. 

    PRICE INCLUDES:

    • HAMMER
    • HOSES & FITTINGS (universal but not guaranteed to fit you machine)
    • MOUNTING - SKID STEER, MINI LOADER OR EXCAVATOR. WE WILL NEED TO KNOW THE MACHINE TYPE, MAKE & MODEL TO MATCH THE MOUNTING.
    MODEL 155E 255E
    MIN WORKING LBS 200 240
    BPM - BLOWS PER MIN 1000-2600 600-3200
    PSI - OPERATING PRESSURE 1160-1885 1380-2175
    PRESSURE RELIEF 3190 3190
    OIL FLOW RANGE 4-8.7 4-9.2
    MAX BAR PSI 290 290
    INPUT POWER 10 12
    TOOL DIAMETER 1.42 1.57
    RECOMMENDED CARRIER WEIGHT (EXC) 1800-4000 2600-5500
    RECOMMENDED CARRIER WEIGHT (SSL) 1300-2900 1800-3700
    NOISE LEVEL 115 115

     

    MODEL 355E 455E
    MIN WORKING LBS 330 510
    BPM - BLOWS PER MIN 800-3000 700-2600
    PSI - OPERATING PRESSURE 1305-2175 1450-2465
    PRESSURE RELIEF 3190 3190
    OIL FLOW RANGE 6.6-14.5 10.6-18.5
    MAX BAR PSI 290 290
    INPUT POWER 19 27
    TOOL DIAMETER 1.89 2.20
    RECOMMENDED CARRIER WEIGHT (EXC) 3500-7900 6000-11500
    RECOMMENDED CARRIER WEIGHT (SSL) 2400-5300 4000-7700
    NOISE LEVEL 114 115
    MODEL 555E 777E
    MIN WORKING LBS 610 860
    BPM - BLOWS PER MIN 600-1800 500-1700
    PSI - OPERATING PRESSURE 1305-2030 1305-2030
    PRESSURE RELIEF 3190 3190
    OIL FLOW RANGE 9.2-23.8 10.6-31.7
    MAX BAR PSI 290 290
    INPUT POWER 28 38
    TOOL DIAMETER 2.83 3.15
    RECOMMENDED CARRIER WEIGHT (EXC) 7100-17600 9500-20900
    RECOMMENDED CARRIER WEIGHT (SSL) 4200-11700 5700-13900
    NOISE LEVEL 118 120
    MODEL 999E 1322E
    MIN WORKING LBS 1110 1870
    BPM - BLOWS PER MIN 500-1700 500-1000
    PSI - OPERATING PRESSURE 1450-2030 1815-2320
    PRESSURE RELIEF 3190 3190
    OIL FLOW RANGE 13.2-39.6 15.9-31.7
    MAX BAR PSI 290 290
    INPUT POWER 47 43
    TOOL DIAMETER 3.54 3.74
    RECOMMENDED CARRIER WEIGHT (EXC) 12800-28700 19800-33100
    RECOMMENDED CARRIER WEIGHT (SSL) 8600-19200
    NOISE LEVEL 123 136
    New RAMMER Compact & Small Hammer Limited Warranty

    WHAT IS COVERED Allied warrants to owners of new RAMMER hammers that, after delivery and placement into service by the first user, the authorized Allied Distributor in whose service area the unit is operated will repair or replace any part that fails as the result of a defect in material or workmanship under normal use according to the following schedule:

    • HAMMER - 0 - 12 MONTHS, PARTS NO CHARGE, LABOR NO CHARGE 
    • VALVE BODY, CYLINDER, & LOWER BODY - 13 - 36 MONTHS, PARTS PRORATED, LABOR 100%

    Tool for Compact Breaker Models 108, 211, 315 & 522. Lifetime warranty against breakage. Tool will be prorated based on wear percentage. Normal wear or abuse is not covered by warranty.


    WHAT IS NOT COVERED

    This warranty does not cover: 

    • conditions which in the reasonable judgement of Allied, arise from misuse, negligence, alteration, accident, or lack of performance of necessary maintenance, or prolonged improper storage;
    • normal maintenance service or the replacement of expendable service items in connection with normal use, wear and tear (such as, hoses, seals, tool bushing, housing, wear plates, buffers, pins, membrane and like items); •
    • damage due to operation with hydraulic flow, pressure or temperature in excess of levels recommended by RAMMER; incorrect or unapproved lubricants,
    • claims for loss of time, inconvenience, loss of use of the product or other consequential damages. Transportation to and from the end-user, service calls, travel time, travel expenses are not covered,
    • demolition tools 30 days against defects in material and workmanship. Abuse, incorrect or lack of lubrication, improper use or operation is not covered under warranty.

    DISTRIBUTOR RESPONSIBILITY

    • Required to register the attachment when delivered to the end-user (Demo, Rental, Sale, and Lease)
    • present and ensure the end-user understand the warranty and coverage for the attachment they are purchasing, demonstrating, leasing or renting.
    • use genuine Allied Rammer parts procured through Allied Construction Products during the warranty period and when performing warranty repairs
    • present and ensure the end-user understand the warranty and coverage for the attachment they are purchasing, demonstrating, leasing or renting.
    • use genuine Allied Rammer parts procured through Allied Construction Products during the warranty period and when performing warranty repairs
    OWNER / END-USER RESPONSIBILITY The owner is responsible for:
    • proper hammer operation and the performance of regular maintenance service as specified in the applicable product manuals;
    • use of only approved replacement parts and demolition tools;
    • immediately removing the hammer from service to prevent additional or subsequent damage if a problem develops.

    This limited warranty is expressly in lieu of any other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular purpose, and any non-contractual liabilities including product liabilities based upon negligence or strict liability. Allied does not authorize any other person to create for it any other liability in connection with this product.

    Allied Construction Products, LLC

    3900 Kelley Avenue Cleveland, Ohio 44114USA

    216-431-2600

    • USUALLY SHIPS IN (3) TO (5) DAYS
    • CHECK FREIGHT RATES IN WEBSITE CART

    This is a great performance hammer for compact equipment. Long stroke piston design creates a hard hit. Very few movable parts inside the hammer increases reliability. Hammer does not require gas charge regularly to keep your cost down on maintenance.