NO TODOS LOS ARTÍCULOS ESTÁN EN STOCK. POR FAVOR LLAME AL 513.777.6666 PARA VERIFICAR LA DISPONIBILIDAD SI ESTÁ PREOCUPADO. HAY UNA TARIFA DE REPOSICIÓN DEL 35% EN PEDIDOS CANCELADOS.

0

Tu carrito está vacío

700817-2

BERCOMAC Premium 44'' Rough Trail cutter for UTV and ATV's

6/25

Premium Berco 44'' Rough Trail cutter

Electric start and Cutting Height Pull Behind Rough Trail Cutters 100% Controlled from your seat! (Battery not included, requires a U-1 battery).

THE ONLY ROUGH TRAIL CUTTER WHICH IS COMPLETELY CONTROLLED FROM THE DRIVER’S SEAT! 

Unique in its category that is already equipped with an electric starter and cutting height

  • 100% Fingertip Controls (control box is included)
    • Start the engine (20 HP Briggs & Stratton)
    • Raise and Lower the unit
    • Engage it
    • Emergency kill switch
    • Throttle arm
  • 100% Safe
    • Equipped with an electric clutch to engage and stop the blades instantly
    • Emergency lanyard kill switch attached to operator and control box, will stop the motor instantly in case the operator leaves the vehicle .
  • Installation
    • Universal on ATV, UTV and tractors equipped with a 2″ rear ball hitch

Equipped with heavy duty blades which will go through shrubs and small twigs with ease.

Tag_qualite_garantie_ANG Warranty  Residential: 1 year Semi-Commercial, Professional or Rental Use : 90 days

700713-1

  1. Angling system: Adjust the rough trail cutter parallel with ground without having to remove it.
  2. Electric Lift: Adjust the cutting height from 3” to 7” from driver’s seat.
  3. Engine: 20 HP “Briggs & Stratton” Electric start and electric clutch.
  4. Hitch: May be adjusted to 3 different positions: left, right and center.
  5. Control box: All controls located at your fingertips
    • Start the motor
    • Start the rough trail cutter
    • Adjust the cutting height
    • Emergency shut down
  6. Operator presence control: Emergency lanyard kill switch attached to operator and control box, will stop the motor instantly in case the operator leaves the vehicle.
  7. Blades: 2 x 15” swing blades.
  8. Stump Jumper: Protects the spindle from potential damage done by an obstacle.
  9. Discharge: Rear discharge.
  10. Reinforcement: Bumpers to protect tires.
  11. Tires: 2 ply 480 x 400-8 pneumatic tires with tire sealant.

Built from 10 gauge steel

Weight: 567lbs

Specifications are subject to change without prior notice.