NO TODOS LOS ARTÍCULOS ESTÁN EN STOCK. POR FAVOR LLAME AL 513.777.6666 PARA VERIFICAR LA DISPONIBILIDAD SI ESTÁ PREOCUPADO. HAY UNA TARIFA DE REPOSICIÓN DEL 35% EN PEDIDOS CANCELADOS.

0

Tu carrito está vacío

Vendido

Toro Dingo TX 450 Mini Track Loader | 25 HP Kohler | Model 22371

Avísame cuando éste producto esté disponible:

oro Dingo TX 450 – Compact Hydraulic Power for Tight Spaces

TheToro Dingo TX 450 Mini Track Loader is a gas-powered, walk-behind mini skid steer designed for landscaping, construction, trenching, material handling, and property maintenance. Combining a compact footprint with a powerful25 HP Kohler Command Pro CH740 engine, the TX 450 provides a cost-effective alternative to manual labor and larger construction equipment.

Designed for contractors and first-time operators alike, the Toro TX 450 delivers hydraulic power for augering, trenching, lifting, and loading in confined work areas.

With an overall width of just33.7 inches, this narrow mini track loader can access residential yards, gated properties, and restricted jobsites where larger skid steers cannot operate.

Compact Size & Zero-Radius Maneuverability

The Toro Dingo TX 450 is engineered for jobs requiring precise machine positioning and limited access.

Its narrow design allows operators to move through compatible doorways, gates, and pathways previously accessible primarily with handheld equipment.

Key advantages include:

  • Compact 33.7-inch overall width

  • Zero-radius turning capability

  • Walk-behind operator configuration

  • Precise maneuverability around structures

  • Easy access to confined landscaping areas

  • Convenient transportation between jobsites

The TX 450 is particularly useful for residential contractors who need to move materials without bringing larger machinery onto established properties.

Low-Impact Rubber Tracks & Improved Traction

The Toro Dingo TX 450 featuresaramid-reinforced rubber tracks designed to distribute machine weight evenly and minimize turf disturbance.

Its tracked undercarriage provides traction on dirt, sand, wet ground, and uneven surfaces while maintaining a relatively low ground pressure of5.1 PSI.

The sprocket-drive undercarriage includes ten road wheels per side for track support.

This low-impact design makes the TX 450 a practical choice for landscaping, lawn renovation, and property maintenance applications where minimizing surface disturbance is important.

Easy Operation with Three Simple Controls

The Toro TX 450 features an intuitive operating system built around three simple controls, allowing operators to become familiar with the machine quickly.

The walk-behind configuration provides excellent visibility and precise positioning when loading materials or operating attachments.

Operator benefits include:

  • Simple, intuitive controls

  • Easy maneuvering in restricted spaces

  • Precise attachment positioning

  • Zero-radius turning

  • Forward travel speeds up to 4.5 MPH

  • Reverse travel speeds up to 2 MPH

These features make the TX 450 suitable for professional landscaping crews, equipment rental operations, and property owners seeking straightforward machine operation.

25 HP Kohler Engine & Versatile Hydraulic Performance

The Toro Dingo TX 450 is powered by a25 HP Kohler Command Pro CH740 gasoline engine, featuring 725 cc displacement and air-cooled operation.

Its auxiliary hydraulic system produces11.4 GPM at 3,000 PSI, providing power for compatible mini skid steer attachments.

The TX 450 can support a variety of applications, including:

  • Augering holes for fences and landscaping

  • Trenching for utilities and irrigation

  • Loading soil, mulch, gravel, and debris

  • Residential construction and site preparation

  • Landscaping and property maintenance

  • Material handling and cleanup

With a rated operating capacity of approximately535 pounds and a tipping capacity of approximately1,530 pounds, the TX 450 delivers practical lifting performance in a compact machine.

Technical Specifications – Toro Dingo TX 450

SPECIFICATION TORO DINGO TX 450
Manufacturer Toro
Model Dingo TX 450
Model Number 22371
UPC / EAN 21038223711
Machine Type Walk-Behind Mini Track Loader
Engine Manufacturer Kohler
Engine Model Command Pro CH740
Engine Horsepower 25 HP @ 3,600 RPM
Engine Displacement 725 cc
Fuel Type Gasoline
Cooling System Air-Cooled
Air Filter Two-Stage, Heavy-Duty Remote
Fuel Tank Capacity 6.0 Gallons (22.7 L)
Operating Weight 1,883 lbs (854 kg)
Rated Operating Capacity 535 lbs (242.7 kg)
Tipping Capacity 1,530 lbs (694 kg)
Overall Width 33.7" (85.5 cm)
Width with Bucket 33.7" (85.5 cm)
Overall Height 46.1" (117 cm)
Height with Bucket 46.1" (117 cm)
Length without Bucket 70.7" (179.5 cm)
Length with Bucket 92" (233.6 cm)
Ground Clearance 4.6" (11.7 cm)
Ground Pressure 5.1 PSI
Hinge Pin Height 65.8" (167.1 cm)
Maximum Operating Height 90.1" (228.8 cm)
Dump Height 46.1" (117 cm)
Dump Angle 38°
Reach at Full Height 21.8" (55.3 cm)
Loader Arm Design Radial Lift
Auxiliary Hydraulic Flow 11.4 GPM (43.1 L/min)
Traction Hydraulic Flow 16.9 GPM (64 L/min)
Hydraulic Pressure 3,000 PSI (207 bar)
Hydraulic Reservoir Capacity 10 Gallons (37.8 L)
Engine Oil Capacity 2.0 Quarts (1.9 L)
Forward Travel Speed 0–4.5 MPH
Reverse Travel Speed 0–2.0 MPH
Traction System Dual Hydrostatic Pump
Track Type Aramid-Reinforced Rubber
Track Width 5.9" (14.9 cm)
Track Length 96.6" (245.3 cm)
Track Drive Sprocket Drive
Undercarriage 10 Road Wheels Per Side
Wheelbase 31.2" (79.2 cm)
Turning Capability Zero-Radius

Specifications are based on the supplied Toro TX 450 model information. Verify machine configuration, attachment compatibility, and replacement track dimensions before ordering.

Buy Toro Dingo Equipment, Attachments & Rubber Tracks from Langefels Equipment Co.

Langefels Equipment Co. supplies mini skid steer attachments, replacement rubber tracks, and construction equipment solutions for contractors, landscapers, and property maintenance professionals nationwide.

Whether you're looking for aToro Dingo TX 450, compatible attachments, or replacement rubber tracks, our equipment specialists can help you identify the right products for your machine.

Call 513-777-6666 for pricing, availability, and nationwide shipping information.

Big Dave Review & Frequently Asked Questions

Big Dave's Review

"The Toro Dingo TX 450 is a great example of why mini track loaders have become so popular with landscapers and contractors. You get a 25 HP Kohler gas engine, 11.4 GPM hydraulic flow, and a machine that's only 33.7 inches wide.

What stands out to me is the narrow design, zero-radius turning, and walk-behind controls. Those features make a difference when you're working through backyard gates, around buildings, or on established lawns.

The aramid-reinforced rubber tracks are another advantage because they help distribute machine weight while providing traction. For contractors who need to auger, trench, lift, and load in tight spaces, the TX 450 is a practical machine that can save a lot of manual labor."

Frequently Asked Questions

What is the Toro Dingo TX 450?

The Toro Dingo TX 450 is a compact, gas-powered, walk-behind mini track loader designed for landscaping, construction, trenching, augering, and material handling.

How much horsepower does the Toro TX 450 have?

The TX 450 is powered by a 25 HP Kohler Command Pro CH740 gasoline engine.

How wide is the Toro Dingo TX 450?

The TX 450 measures approximately 33.7 inches wide, allowing access through many residential gates and narrow pathways.

How much can a Toro TX 450 lift?

The TX 450 has a rated operating capacity of approximately 535 pounds and a tipping capacity of approximately 1,530 pounds.

What is the hydraulic flow of the Toro Dingo TX 450?

The auxiliary hydraulic system delivers approximately 11.4 GPM at 3,000 PSI.

What type of rubber tracks does the TX 450 use?

The TX 450 uses aramid-reinforced rubber tracks measuring approximately 5.9 inches wide. Verify the complete replacement track specification before purchasing.

Does the Toro Dingo TX 450 have zero-radius turning?

Yes. Its zero-radius turning capability provides excellent maneuverability in confined work areas.

Is the Toro TX 450 easy to operate?

Yes. The machine features three simple controls designed to make operation straightforward for both experienced contractors and first-time users.

What attachments can the Toro Dingo TX 450 operate?

Depending on hydraulic and mounting compatibility, the TX 450 can operate attachments such as buckets, augers, trenchers, and other mini skid steer tools.

Where can I purchase attachments and rubber tracks for the Toro TX 450?

ContactLangefels Equipment Co. at 513-777-6666 for compatible mini loader attachments, replacement rubber tracks, and equipment information.