Cat® Box Blades are designed for grading and leveling of large commercial properties, housing pads, roadways and parking lots. Two models are available, 2.1 m (7 ft) and 2.4 m (8 ft), and are designed to operate both manually and automatically with the use of Laser or GPS grading systems. Features: AccuGrade™ technology Blade comes standard ready to work in manual mode. Requires 14-pin work tool harness with proper joysticks. Can be outfitted with AccuGrade technology through local SITECH® Dealer. Curved moldboards Front and rear curved moldboards allow material to roll and fold, improving capacity and performance. Dual parabolic mirrors Dual parabolic mirrors provide full visibility to the front edge, allowing operator to identify how much the blade is loading and see out to the corners of the Box Blade. Centrally located electronics Technology components are centrally located and simply route to their respective harnesses back to this location on the tool. Then, a single harness routes to the control module in the cab or on the tool. Wear indicating cutting edges Wear indicating cutting edges feature 20% more wear material on the ground engaging section of the edge. Additionally, indicating when it is time to flip or replace the edge. Dual front wheels Dual front wheels are mounted to an independent axle and on casters to provide stability in both directions of travel. These wheels are air filled and will provide support for blade operation. Bolt-on reversible side cutters and wings Bolt-on side cutters and wings improve the life of the tool. Side cutters are reversible and box wings are replaceable. Both are bolt-on for simple replacement. Protected hydraulic and electrical components Hydraulic valve and Electronic Control Module (ECM) is safely mounted within the internal frame of the tool, protected from damage. Standard fixed masts Fixed masts provide great performance for single or dual laser technology configurations. Serrated steps Serrated bolt-on step provides safe ingress and egress from machine cab. Additional weld-on serrated steps on the blade ensure safe receiver adjustment, install or removal.
Dual Laser with Standard Fixed Masts: Dual slope control or slope and elevation control. High levels of accuracy are achieved for flat, slope work and finished grading