Your Cart is Empty
ALLIED RAMMER Excellence series excavator hydraulic hammers
$23,000.00 - $225,450.00
HYDRAULIC HAMMERS
There is a Rammer® hydraulic hammer for virtually any breaking application. So whether you are working with demolition, recycling, mining, construction or quarrying, we have the hammer to give you the best results.
Rammer® hammers are tough, durable and offer you the most economical owning and operating costs while delivering maximum production.
EXCELLENCE LINE
Stronger than time, the Excellence Line is Rammer flagship line of hydraulic hammers, which has been serving customers around the world for over four decades. The Excellence Line continues Rammer's tradition of delivering innovative hammers designed to improve your profitability, safety and performance.
All Excellence Line hammers include integrated smart RD3 remote monitoring system. With MyFleet portal access to data you are able to follow operating hours, GPS location and service intervals for easier fleet management and more efficient processes.
Rammer Excellence Hydraulic Hammers (Mid-Range)
With Rammer's Medium Range hydraulic hammers no job is too dirty and no conditions are too tough for you.
Slim and lightweight construction allows the hammer to reach narrow spaces and offers the best in market power-weight ratio for higher productivity.
Medium Range hydraulic hammers are your reliable long life solution for any breaking application for carriers between 10 and 32 tons (22 000–70 500 lb).
Features:
- Slim housing provides operator with good visibility and better accessibility in trenching and demolition applications
- RamValve protects the hammer from damage due to excessive hydraulic input
- VIDAT System includes vibration dampened tie rods that extend operating life, reduce operating costs and minimizes downtime
- RamData III standard on all Excellence Line Hammers, GPS enabled
- Simple In-Field Lower Tool Bushing Replacement (Except on 1322E)
- Separate greasing channels from the valve body into the upper and lower bushing, which will increase the lifetime of your tool and bushings (Except on 1322E)
- Idle blow on/off switch at the top of valve housing makes it easier to adjust
| MODEL |
CARRIER EXCAVATOR |
GPM |
ENERGY CLASS |
TOOL DIAMETER |
WORKING LBS. |
| 1322E | 19800-33100 LBS | 16 - 32 | 1600 | 3.74 | 1870 |
| 1655E | 26500-44100 LBS | 24 - 34 | 2500 | 4.53 | 2400 |
| 2166E | 35300-57300 LBS | 32 - 48 | 3500 | 4.92 | 3090 |
Rammer Excellence Hydraulic Hammers (Large Range)
Features:
- Sound-suppressed housing enhances use in urban areas and provides operator-friendly environment in the cab of carrier
- RamValve detects overflow and prevents damage from system overload
- VIDAT System includes vibration dampened tie rods that extend operating life, reduce operating costs and minimizes downtime
- Separate greasing channels from the valve body into the upper and lower bushing, which will increase the lifetime of the tool and bushings
- RamData III standard on all Excellence Line Hammers, GPS enabled
- Simple In-Field Lower Tool Bushing Replacement (Except on 9033E)
| MODEL |
CARRIER EXCAVATOR |
GPM |
ENERGY CLASS |
TOOL DIAMETER |
WORKING LBS. |
| 2577E | 46300-70500 LBS | 37 - 53 | 5000 | 5.31 | 3880 |
| 3288E | 57300-92600 LBS | 42 - 66 | 8000 | 5.59 | 5290 |
| 4099E | 75000-121300 LBS | 66- 93 | 11000 | 6.54 | 7450 |
| 5011E | 94800-176400 LBS | 74 - 100 | 13000 | 7.48 | 10470 |
| 9033E | 149900-264600 LBS | 95 - 121 | 18000 | 8.46 | 16310 |
RD3 Smart Features & MyFleet Platform
All of Allied's Rammer E series breakers are now equipped with one of the first ever remote monitoring system for hydraulic hammers. This GPS enabled fleet management tool offers complete visibility over your entire fleet from the comfort of your computer chair. No more do you need to have a special reading device and the specific RamData unit, you can now access all your information from the MyFleet platform online.
FEATURES
- Remote Data Access allows you to retrieve the RamData III information from your computer
- With MyFleet, you have 24/7 access to your fleet data
- Eliminate the guess work with MyFleet. You can know exactly how your hammer is being operated and utilized and you can have the real data you need to make informed decisions
1322E
The Rammer 1322E has been built to last. The 850 kg hammer is suitable for carriers in the 9 to 15 tonne range. Low-maintenance design ensures lower owning and operating costs.
The 1322E features field replaceable lower tool bushing and sealed membrane-type accumulator to ensure that every blow is as hard as the previous, whilst providing protection against hydraulic spikes.
The Rammer 1322E comes with the remote monitoring hardware RD3 installed.
FEATURES
APPLICATIONS
1533E
The 870 kg Rammer 1533E benefits from a radical lightweight design. Suitable for carriers between 10 and 19 tons.
Lightweight design gives this hammer a class-leading power-to-weight ratio and allows operators to enjoy a high level of productivity in a wide variety of demolition, recycling, quarrying or other applications.
The Rammer 1533E comes with the remote monitoring hardware RD3 installed.
FEATURES
- Wheeled excavator hammer
APPLICATIONS
1655E
The Rammer 1655E hydraulic hammer is suitable for carriers in the 12 to 20 tonne range. The 1,100 kg hammer with an impact rate of 540–920 blows per minute, features Rammer’s Fixed Blow Energy operating principle, which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 1655E comes with the remote monitoring hardware RD3 installed.
FEATURES
APPLICATIONS
2155E
Rammer 2155E embraces the very latest in hydraulic hammer design. The 1240 kg hammer is suitable for carriers in the 14 to 26 tonne range.
The 2155E has a slim body, robust housing made of wear resistant steel and a replaceable bottom plate and other smart features. A key feature is its design that provides exceptional flexibility to match the hammer precisely to application and material requirements by choosing additional parts from a range of options as “retrofit”.
The Rammer 2155E comes with the remote monitoring hardware RD3 installed.
FEATURES
- Wheeled excavator hammer
APPLICATIONS
2166E
The Rammer 2166E hydraulic hammer is suitable for carriers in the 16 to 26 tonne range. The 1,360 kg hammer with an impact rate of 430 - 790 blows per minute features Rammer’s Fixed Blow Energy operating principle, which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 2166E comes with the remote monitoring hardware RD3 installed.
FEATURES
APPLICATIONS
2577E
Rammer 2577E hydraulic hammer is suitable for carriers in the 21 to 32 tonne range. The 1,670 kg hammer with an impact rate of 450 to 750 blows per minute features Rammer’s Fixed Blow Energy operating principle which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 2577E comes with the remote monitoring hardware RD3 installed.
FEATURES
APPLICATIONS
3288E
The 2,350 kg Rammer 3288E hydraulic hammer is suitable for carriers in the 26 to 42 tonne range. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 3288E comes with the remote monitoring hardware RD3 installed.
FEATURES
APPLICATIONS
4099E
The 3,380 kg Rammer 4099E is suitable for carriers in the 36 to 55 tonne range. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 4099E comes with the remote monitoring hardware RD3 installed.
FEATURES
APPLICATIONS
5011E
The 4,750 kg Rammer 5011E hammer is suitable for carriers between 43 and 80 tons. Designed by using a revolutionary new operating principle which combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 55011E comes with the remote monitoring hardware RD3 installed.
FEATURES
APPLICATIONS
9033E
The 7,400 kg Rammer 9033E is suitable for carriers between 65 and 120 tons. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
Heavy duty housing and in-the-field rotatable and replaceable Lower Tool Bushing allows to minimize operating costs.
The Rammer 9033E comes with the remote monitoring hardware RD3 installed.
FEATURES
APPLICATIONS
| RAMMER 1322E | ||
| Minimum working weight, flange mounted *1 | 850 kg | 1870 lb |
| Weight | 710 kg | 1570 lb |
| Impact rate (frequency) | 500 - 1000 bpm | |
| Operating pressure | 125 - 160 bar | 1815 - 2320 psi |
| Oil flow range | 60 - 120 l/min | 15.9 - 31.7 gal/min |
| Pressure relief setting *2 | 175 - 210 bar | 2540 - 3045 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Pressure in LP-circuit | 26 - 28 bar | 375 - 405 psi |
| Back pressure max | 20 bar | 290 psi |
| Input power | 32 kW | 43 hp |
| Tool diameter | 95 mm | 3.74 in |
| Pressure line connection (IN) | BSPP-internal 1" | |
| Return line connection (OUT) | BSPP-internal 1" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 1/2" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 9 - 15 t | 19800 - 33100 lb |
| Noise level, measured (2000/14/EC) | 136 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 140 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Tuesday, June 6, 2023)
| RAMMER 1533E | ||
| Minimum working weight, flange mounted *1 | 870 kg | 1920 lb |
| Weight | 710 kg | 1570 lb |
| Working length | 2004 mm | 78.9 in |
| Impact rate (frequency) | 550 - 950 bpm | |
| Operating pressure | 140 - 160 bar | 2030 - 2320 psi |
| Oil flow range | 80 - 140 l/min | 21.1 - 37.0 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 37 kW | 50 hp |
| Tool diameter | 105 mm | 4.13 in |
| Pressure line connection (IN) | ORFS ( 1 7/16-12 UN ) | |
| Return line connection (OUT) | ORFS ( 1 7/16-12 UN ) | |
| Pressure line size, min. inner diameter | 19 mm | 0.75 in |
| Return line size, min. inner diameter | 19 mm | 0.75 in |
| Grease connection | Tema 2520 | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 11 - 17 t | 24300 - 37500 lb |
| Carrier weight, range *3 | 10 - 19 t | 22000 - 41900 lb |
| Noise level, measured (2000/14/EC) | 120 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 124 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Wednesday, August 23, 2023)
| RAMMER 1655E | ||
| Minimum working weight, flange mounted *1 | 1100 kg | 2430 lb |
| Weight | 890 kg | 1960 lb |
| Impact rate (frequency) | 540 - 920 bpm | |
| Operating pressure | 135 - 145 bar | 1960 - 2105 psi |
| Oil flow range | 90 - 130 l/min | 23.8 - 34.3 gal/min |
| Pressure relief setting *2 | 190 bar | 2755 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 31 kW | 42 hp |
| Tool diameter | 115 mm | 4.53 in |
| Pressure line connection (IN) | SAE 6000 psi 1" | |
| Return line connection (OUT) | SAE 6000 psi 1" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 12 - 20 t | 26500 - 44100 lb |
| Noise level, measured (2000/14/EC) | 123 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 127 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Tuesday, May 30, 2023)
| RAMMER 2155E | ||
| Minimum working weight, flange mounted *1 | 1240 kg | 2730 lb |
| Weight | 1040 kg | 2290 lb |
| Working length | 2198 mm | 86.5 in |
| Impact rate (frequency) | 490 - 780 bpm | |
| Operating pressure | 140 - 160 bar | 2030 - 2320 psi |
| Oil flow range | 120 - 180 l/min | 31.7 - 47.6 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 48 kW | 64 hp |
| Tool diameter | 118 mm | 4.65 in |
| Pressure line connection (IN) | ORFS ISO 8434-3 ( 1 11/16-12 UN ) | |
| Return line connection (OUT) | ORFS ISO 8434-3 ( 1 11/16-12 UN ) | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | Tema 2520 | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 19 - 22 t | 41900 - 48500 lb |
| Carrier weight, range *3 | 14 - 26 t | 30900 - 57300 lb |
| Noise level, measured (2000/14/EC) | 124 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 128 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Wednesday, February 9, 2022)
| RAMMER 2166E | ||
| Minimum working weight, flange mounted *1 | 1360 kg | 3000 lb |
| Weight | 1130 kg | 2490 lb |
| Impact rate (frequency) | 430 - 790 bpm | |
| Operating pressure | 140 - 160 bar | 2030 - 2320 psi |
| Oil flow range | 120 - 180 l/min | 31.7 - 47.6 gal/min |
| Pressure relief setting *2 | 210 bar | 3045 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 48 kW | 64 hp |
| Tool diameter | 125 mm | 4.92 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 16 - 26 t | 35300 - 57300 lb |
| Noise level, measured (2000/14/EC) | 121 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 125 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Wednesday, February 9, 2022)
| RAMMER 2577E | ||
| Minimum working weight, flange mounted *1 | 1670 kg | 3680 lb |
| Weight | 1410 kg | 3110 lb |
| Working length | 2299 mm | 90.5 in |
| Impact rate (frequency) | 450 - 750 bpm | |
| Operating pressure | 135 - 145 bar | 1960 - 2105 psi |
| Oil flow range | 140 - 200 l/min | 37.0 - 52.8 gal/min |
| Pressure relief setting *2 | 190 bar | 2755 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 48 kW | 64 hp |
| Tool diameter | 135 mm | 5.31 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 23 - 30 t | 50700 - 66100 lb |
| Carrier weight, range *3 | 21 - 32 t | 46300 - 70500 lb |
| Noise level, measured (2000/14/EC) | 120 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 124 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Wednesday, February 9, 2022)
| RAMMER 3288E | ||
| Minimum working weight, flange mounted *1 | 2350 kg | 5181 lb |
| Weight | 2040 kg | 4500 lb |
| Working length | 2581 mm | 101.6 in |
| Impact rate, Long stroke | 370 - 630 bpm | |
| Impact rate, Short stroke | 460 - 740 bpm | |
| Operating pressure | 150 - 160 bar | 2175 - 2320 psi |
| Oil flow range | 160 - 250 l/min | 42.3 - 66.0 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 67 kW | 90 hp |
| Tool diameter | 142 mm | 5.59 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 28 - 38 t | 61700 - 83800 lb |
| Carrier weight, range *3 | 26 - 42 t | 57300 - 92600 lb |
| Noise level, measured (2000/14/EC) | 124 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 128 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Monday, December 19, 2022)
| RAMMER 4099E | ||
| Minimum working weight, flange mounted *1 | 3380 kg | 7450 lb |
| Weight | 2800 kg | 6170 lb |
| Working length | 2962 mm | 116.6 in |
| Impact rate, Long stroke | 400 - 560 bpm | |
| Impact rate, Short stroke | 520 - 700 bpm | |
| Operating pressure | 150 - 160 bar | 2175 - 2320 psi |
| Oil flow range | 250 - 350 l/min | 66.0 - 92.5 gal/min |
| Pressure relief setting *2 | 210 bar | 3045 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 12 bar | 175 psi |
| Input power | 93 kW | 125 hp |
| Tool diameter | 166 mm | 6.54 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 37 - 50 t | 81600 - 110200 lb |
| Carrier weight, range *3 | 36 - 55 t | 79400 - 121300 lb |
| Noise level, measured (2000/14/EC) | 126 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 130 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Wednesday, February 9, 2022)
| RAMMER 5011E | ||
| Minimum working weight, flange mounted *1 | 4750 kg | 10470 lb |
| Weight | 3900 kg | 8600 lb |
| Working length | 3329 mm | 131.1 in |
| Impact rate, Long stroke | 370 - 530 bpm | |
| Impact rate, Short stroke | 450 - 620 bpm | |
| Operating pressure | 160 - 170 bar | 2320 - 2465 psi |
| Oil flow range | 280 - 380 l/min | 74.0 - 100.4 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 108 kW | 145 hp |
| Tool diameter | 190 mm | 7.48 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/2" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/2" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 45 - 69 t | 99200 - 152100 lb |
| Carrier weight, range *3 | 43 - 80 t | 94800 - 176400 lb |
| Noise level, measured (2000/14/EC) | 122 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 126 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Wednesday, February 9, 2022)
| RAMMER 9033E | ||
| Minimum working weight, flange mounted *1 | 7400 kg | 16310 lb |
| Weight | 6000 kg | 13230 lb |
| Working length | 3707 mm | 145.94 in |
| Impact rate, Long stroke | 300 - 520 bpm | |
| Impact rate, Short stroke | 355 - 645 bpm | |
| Operating pressure | 170 - 180 bar | 2465 - 2610 psi |
| Oil flow range | 360 - 460 l/min | 95.1 - 121.5 gal/min |
| Pressure relief setting *2 | 230 bar | 3335 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 138 kW | 185 hp |
| Tool diameter | 215 mm | 8.46 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/2" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/2" | |
| Pressure line size, min. inner diameter | 38 mm | 1.50 in |
| Return line size, min. inner diameter | 38 mm | 1.50 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 65 - 120 t | 143300 - 264600 lb |
| Noise level, measured (2000/14/EC) | 127 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 131 dB(A) | |
| *1 Includes average mounting bracket and standard wear parts *2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi *3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Wednesday, February 9, 2022)
 |
|
|
|
 |
|
 |
|
 |
|
|
|
 |
|
|