Your Cart is Empty
WAIN ROY High Flow Cold Planer for skid steers
$0.00 - $42,490.00
CP16ATD/CP18ATD/CP24ATD/CP30ATD
COLD PLANER FOR HIGH-FLOW SKID STEERS
FEATURES
- Skid Steer (SAE J2513) Quick Attach System
- Hydraulic depth up to 6 inches
- 22-inch Hydraulic side-shift
- Top center pivot design
- Front and rear cast wheels
- Dual depth cylinders
- Double reduction planetary drive
- Debris guards
- Hydraulic hoses included
- Top accessible drum
- Pick removal tool
- Welded to American Welding Society standards
APPLICATIONS
- For asphalt and concrete applications
- Curb cuts (wedge cuts)
- Butt joints
- Pothole repair
- Milling of frost heaves in pavement
- Re-establish proper drainage
- characteristics of pavement
- Texture pavement for skid resistance
- Remove asphalt around manholes and storm drains prior to overlay
- Traffic stripe removal (fine finish)
- Mill small areas inaccessible by larger dedicated planers
- Full depth utility cuts prior to installation or repair of gas, sewer and water lines
- Bridge deck planing due to weight restrictions of larger planers
***CALL FOR INFORMTION AND PRICES ON THE BASE MODEL CONFIGURATIONS
| BASE MODEL | FLOW GPM | PRESSURE PSI | DRUM WIDTH | NO. OF PICKS | LBS |
| CP16ATDALITEC | 22-32 |
2000-3500 |
16" |
44 |
1750 |
| CP18ATDALITEC | 25-32 | 2000-3500 | 18" | 48 | 1801 |
| CP24ATDALITEC | 28-32 | 2200-3500 | 24" | 62 | 1919 |
| CP30ATDALITEC | 30-32 | 2500-3500 | 30" | 74 | 2450 |
| BASE MODE CONFIGURATIONS | DESCRIPTION |
| CP16ATDXT | Same as CP16ATDALITEC except for skid steers with Auxiliary pump outputs of >32 gpm. |
| CP16ATDXTP | Same as CP16ATDALITEC except for skid steers with auxiliary pump outputs of >32 gpm. & >3500 psi. |
| CP16ATD/S/C | Same as CP16ATDALITEC except for skid steers with single-circuit auxiliary hydraulics. |
| CP18ATDXT | Same as CP18ATDALITEC except for skid steers with Auxiliary pump outputs of >32 gpm. |
| CP18ATDXTP | Same as CP18ATDALITEC except for skid steers with auxiliary pump outputs of >32 gpm. & >3500 psi. |
| CP18ATD/S/C | Same as CP18ATDALITEC except for skid steers with single-circuit auxiliary hydraulics. |
| CP24ATDXT | Same as CP24ATDALITEC except for skid steers with Auxiliary pump outputs of >32 gpm. |
| CP24ATDXTP | Same as CP24ATDALITEC except for skid steers with auxiliary pump outputs of >32 gpm. & >3500 psi. |
| CP24ATD/S/C | Same as CP24ATDALITEC except for skid steers with single-circuit auxiliary hydraulics. |
| CP30ATDXT | Same as CP30ATDALITEC except for skid steers with Auxiliary pump outputs of >32 gpm |
| CP30ATDXTP | Same as CP30ATDALITEC except for skid steers with auxiliary pump outputs of >32 gpm. & >3500 psi. |
| CP30ATD/S/C | Same as CP30ATDALITEC except for skid steers with single-circuit auxiliary hydraulics. |