Your Cart is Empty
1DSS-3-MF
DIGGA auger drives for skid steers
$3,000.00 - $8,140.00
1/26
Digga Auger Drives for Skid Steer Loaders
Digga’s skid steer auger drives combine unmatched performance, durability, and cost-effectiveness. With over 30 years of design and development, Digga has engineered a premium range of auger drives, fully manufactured and assembled in-house using high-grade materials and rigorous quality control to ensure reliable operation in any jobsite condition.
Equipped with Digga-designed Eaton bell motors and input housing, the innovative gearbox design allows the drive to go down the hole without extensions, maximizing drilling depth while minimizing downtime and maintenance. Backed by industry-leading warranty and local factory support, Digga auger drives are built for long-term performance and peace of mind.
Key Features & Benefits
-
Compact Digga-manufactured gearbox for robust operation
-
Digga-designed Eaton motor for consistent torque and power
-
2-piece shaft design ensures maximum side load capacity without overloading bearings
-
Lifetime shaft pull-out warranty
-
5-year gearbox and 3-year motor warranty
-
Over 30 years of design and manufacturing experience
-
Innovative Halo Auger Alignment System with LED indicators for precise, plumb drilling
Package Includes
-
Hoses & fittings (87" long)
-
Universal skid steer/Bobcat mounting
-
2" hex shaft
Digga auger drives are compatible with ALS, ADS, DSS, and DDS augers up to 30t, providing contractors, landscapers, and utility crews with a high-performance, low-maintenance solution for efficient and accurate drilling.
The Halo Auger Alignment System is located in the hood ring of the auger. It provides the operator with a simultaneous clear line of sight to itself, and the hole being dug. HALO utilizes a band of LED lights, which when fully illuminated green, indicate the auger is plumb. If the auger moves from its plumb position, a sequence of red and green lights will be lit to effortlessly guide the operator back to plumb. Available range at time of launch, will include ALS, ADS, DSS, and DDS augers up to 30t.
| DESCRIPTION | 1DSS | 2DSS | 3DSS | 4DSS |
| TORQUE (FT-LBS @ 3000 PSI |
1467 | 2554 | 2,829 | 3,275 |
| MAX TORQUE FT-LBS @ 3500 PSI |
1712 | 2630 | 3,300 | 3,821 |
| RECOMMENDED FLOW (GPM) | 6-16 | 10-26 | 10-30 | 10-30 |
| MOTOR TYPE | EATON | EATON | EATON | EATON |
| MAX PRESSURE - DO NOT EXCEED |
3500 PSI @ 16 GPM | |||
| MAX FLOW - DO NOT EXCEED |
30 GPM @ 1800 PSI | |||
| MAX HORSE POWER | 33 | 33 | 34 | 34 |
| PRESSURE RELIEF VALVE | N/A | N/A | N/A | N/A |
| STANDARD OUTPUT SHAFT | 2" HEX | 2" HEX | 2" HEX | 2" HEX |
| RECOMMENDED AUGER | A4 / RC4 | A4 / RC4 | A4 / RC4 | A4 / RC4 |
| MAX DRILLING DIAMETER (CLAY / SHALE)* |
12" | 24" | 24" | 24" |
| MAX DRILLING DIAMETER (EARTH)* |
24" | 30" | 30" | 30" |
| WEIGHT (LBS) | 101 | 123 | 123 | 125 |
| OVERALL LENGTH (IN) | 24.5" | 25.9" | 25.9" | 25.9" |
| DIAMETER (IN) | 7.4" | 9.4" | 9.4" | 9.4" |
The 1DSS, 2DSS, 3DSS, 4DSS and 4DDS are designed for heavy duty drilling. These augers can only handle 6 to 42 GPM flow depending on the model. These augers have a four way swing mounting (forward and back, side to side). An mounting extension option allows you to use bit extensions to drill deep holes. The package includes The hoses, fittings, drive and mountings so it is ready to go on the job site.