Your Cart is Empty
22911
TORO DINGO vibratory drive for mini loader
$0.00 - $10,843.00
1/26
Vibratory Plow Attachment
The Toro® Dingo® vibratory plow attachment greatly reduces a contractor's time spent on irrigation and cable installations. Exclusively designed and built by Toro specifically for use on the Dingo, the vibratory plow optimizes pipe-pulling performance while minimizing turf damage during an installation. Also, use the chuted blade and spool carrier to install wire or cable.
- Convenient depth-indicator
- Elliptical vibrating motion
- Pull pipe up to 2" diameter
- 12" and 18" blades available
-
Depth Indicator
Convenient depth-indicator ensures pipe-laying at uniform depth.
-
Heavy Cast Coulter
Provides knife like slit in turf ahead of blade. Allows blade to move through turf with minimal tearing.
-
Elliptical Vibrating Motion
Creates natural force in the direction of the machine, thus helping to pull pipe and cable through difficult soil conditions.
-
Flexible Head
Compression springs allow the head to pivot 30-degree side-to-side for tight turning.
-
Isolators
Rubber isolators control the plow vibration amplitude
| Blade Adjustment | Adjust f/ 0 -18" (0-46 cm) depths |
|---|---|
| Chain | Machined, plated 2" (5 cm) hex bullet |
| Construction | Fabricated, welded steel frame |
| Depth Control | Adjustable |
| Height | 24 in. / 60.9 cm |
| Length | 35 in. / 88.9 cm |
| Models | Dingo 320-D, Dingo 323, Dingo TX 1000, Dingo TX 1000 TURBO, Dingo TX 1300, Dingo TX 427, Dingo TX 525, Dingo TX 700 |
| Mounting Frame | Dingo® quick-attach mount plate, fabricated, welded base |
| Quick Couplers | Dripless, flush face quick couplers |
| Weight | 400 lbs / 181 kg |
| Width | 29 in. / 73.6 cm |
Spool Carrier
Mounts onto Dingo loader arm to carry spool of wire or cable. Used with the chuted blade assembly for pulling cable or wire. Part number 104-2685
Blade Options1/4" x 12" (30.5 cm) Part number 99-2682-03
1/2" x 18" (45.7 cm) Part number 99-8600-03
3/8" x 18" (45.7 cm) Part number 99-8647-03
3/8" x 12" Part number 106-7646-03
Chuted Blade Part number 104-0640
1" (2.5 cm) Taper Lock Puller for PVC. Part number 100-6285
1-1/2" (3.8 cm) Taper Lock Puller for PVC. Part number 100-6290
2" (5.1 cm) Taper Lock Puller for PVC. Part number 100-6294
3/4" to 1-1/4" (1.9 cm to 3.2 cm) Basket Grip Puller for Poly. Part number 100-1661
1-1/4" to 1-1/2" (3.2 cm to 3.8 cm) Basket Grip Puller for Poly. Part number 100-1662
Tapered Threaded Puller. Part number 104-0646
Bullet (needed for Puller). Part number 100-6337