Your Cart is Empty
VIRNIG X30 60" rotary brush cutter for excavators
$0.00 - $13,800.00
Revised
X30 Mini Excavator Rotary Brush Cutter
Cut up to 6″ diameter trees and access hard to reach areas for a maintained finish.
- NO CASE DRAIN REQUIRED. DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVE PROTECTION
- UNIQUE BOLT-ON FRONT DECK. REMOVE FOR 270-DEGREE BLADE ENGAGEMENT
- BOLT-ON MOUNTING INTERFACE FOR QUICKLY CHANGING HANGER BRACKETS
- ROUNDED FLYWHEEL WITH 3 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
- SERRATED REAR DECK FOR BACK DRAGGING BRUSH & GRUBBING STUMPS
- STANDARD MOTOR GUARD & SPINDLE GUARD
- VARIOUS HANGER BRACKETS AVAILABLE TO FIT MOST EXCAVATOR BRANDS
* DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON MACHINE. PROTECT THE OPERATOR AND THE PEOPLE AROUND THE MACHINE.
| MODEL | XBC60 |
| Cut Width (Inches) | 60.0 |
| Overall Width Without Sides / With Sides (Inches) | 71.5 / 72.7 |
| Height: Overall / Deck (Inches) | 23.2 / 6.1 |
| Overall Depth (Inches) | 75.5 |
| Minimum Cut Height (Inches) | 2.3 |
| Cutting Capacity, Diameter (Inches) | 6.0 |
| Deck Thickness: Top / Side (Inches) | |
| Recommended Flow Rate (GPM) | 20-28 / 28-35 / 35-38 |
| Max Operating Pressure (PSI) | 3500 / 4100¹ |
| Approximate Weight No Sides / Both Sides (Pounds) | 1050² / 1250² |
| [Optional] Carbide Teeth: Weight (Pounds) / Qty | 12 / 18 |
| Approximate Operating Weight | |
| Mini-Ex’s Lowest Lift Capacity Over Side at Max Reach | |
| Recommended Mini-Excavator Weight (Pounds) | 15000-26000 |
¹4100 PSI max pressure only applies to 28-35 and 35-38 GPM flow ranges.
²Weight doesn’t include hanger bracket or tooth option.
³Add weight of cutter, hanger and options to determine operating weight. Hangers typically weigh between 80 and 150 pounds.
⁴Excavator’s lowest lift capacity of any blade and boom orientation must exceed cutter operating weight. Excavator lift capacities vary based on arm length, counterweight and open vs closed cab. Ensure the excavator configuration in the manufacturer’s specs matches your machine’s exact setup.
BLADE TIP SPEEDS (FPM)
| MODEL | 15 GPM | 22 GPM | 25 GPM | 28 GPM |
| XBC60-28 | – | 12,875 | 14,635 | 16,385 |
| MODEL | 28 GPM Minimum | 35 GPM Maximum |
| XBC60-35 | 12,780 | 15,975 |
| MODEL | 35 GPM Minimum | 38 GPM Maximum |
| XBC60-38 | 12,830 | 13,930 |
ONE BOLT-ON SIDE CURTAIN
- Installed on the left side to reduce debris thrown toward the operator.
TWO BOLT-ON SIDE CURTAINS
- Completely enclose the cutter for max debris containment.
CARBIDE TEETH
- Shred material for a better finish.
BOLT-ON HANGER BRACKET
- Many options available.
- Please contact for hanger pricing and availability.
This is a guide. Please call if you have questions.
| CASE | |
| CAT |
|
| DEVELON | |
| GEHL | |
| HITACHI |
|
| HYUNDAI | |
| JCB |
|
| KATO / IHI | |
| KOBELCO | |
| KOMATSU | |
| MUSTANG | |
| NEW HOLLAND | |
| SANY | |
| TAKEUCHI |
|
| TEREX | |
| VOLVO | |
| WACKER | |
| YANMAR |
|